Skip to content

Home Assistant setup

Guide to setup Home Assistant and related services on PVE1.

Setup containers

  • Install and start services
- Install and start containers
```bash
sudo su
cd /root/homelab-rendered
src/homesvcs/install_svcs.sh traefik
src/homesvcs/install_svcs.sh vmagent
src/homesvcs/install_svcs.sh mosquitto
src/homesvcs/install_svcs.sh zigbee2mqtt
# src/homesvcs/install_svcs.sh esphome
src/homesvcs/install_svcs.sh home_assistant
src/homesvcs/install_svcs.sh fluentbit

systemctl restart node_exporter

Networking

Refs: ESPHome, Shelly - Enable LAN access to various services.

NET_IFACE=$(podman network inspect systemd-net | jq -r '.[0].network_interface')
# TODO: For iot devices, migrate from LAN to wifi vlan
# MQTT broker
ufw allow in from any to any port 1883 proto tcp
ufw route allow in on enp6s18 out on $NET_IFACE to any port 1883
# ESPHome OTA updates
ufw allow in from 192.168.1.0/24 to any port 3232,8266,2040,8892 proto tcp
ufw route allow in on enp6s18 out on $NET_IFACE to any port 3232,8266,2040,8892 proto tcp
# HA, Shelly devices
# ufw allow in from 192.168.1.0/24 to any port 5683 proto udp
# ufw route allow in on enp6s18 out on $NET_IFACE to any port 5683